![background image](http://html1.mh-extra.com/html/darwin-fitness/df-rm50/df-rm50_assembly-and-operating-instructions-manual_510607019.webp)
RM 50
19
CALORIES
Adjust the calories burnt goal with the UP/DOWN buttons (110 to 9990
Cal), in 10 Cal increments
HRC/PULSE
Shows your heart rate. In manual mode adjust the Heart rate goal with
the UP/DOWN buttons (30 to 240 BPM), in 1 BPM (Beats per Minute)
increments. HRC is shown in the upper section of the display. The
computer displays the Heart Rate during the training session. When the
goal is reached, PULSE is displayed and a signal is heard until you change
the program or take off your heart rate sensor. Heart Rate monitoring is
possible only with a 5kHz Heart Rate Sensor.
CALENDAR
The display shows the Year, Month and Day while in sleep mode.
TEMPERATURE
The display shows the room temperature while in sleep mode.
CLOCK
The display shows the time while in sleep mode.
3.2
Button Functions
UP/DOWN
By pressing the COOL DOWN button during a training session the
cool down program will start directly. The speed of the belt will slowly
decrease to a full stand still within 2 or 3 minutes.
ENTER
With this button you can choose between the different programs.
START/STOP
With this button you can enter a program or confirm the selected value.
RESET
With this button you can change the fan speeds: 1x low 2x high 3x off
RECOVERY
With this button you can choose the display values between speed in
km/h and pace in min/km.
Summary of Contents for DF-RM50
Page 2: ...RM 50 2 ...
Page 35: ...35 8 3 Exploded Drawing ...