30
Maintenance Menu
1
2
3
4
5
6
7
8
9
10
11
12
13
Calibration：
Make adjustments so that the target sensor properly sense the
position where the dart hits on the target.
Follow the instructions in order to perform the test.
Note：Start work with nothing stuck in the target.
Use a straight tip.
Be sure to check with one tip.
Do not touch the target during the check.
When the location you are checking turns yellow,
remove the tip and check the next location.
5 - 1 - 3 - 1 Fig. 03
5 - 1 - 3 - 2 Impact sensor
You can adjust the sensitivity of the impact sensor.
Impact sensors are used to make judgement of outboards during the game.
Sensitivity Adjustment：
Moving the slide bar toward MIN makes the sensors respond to
small impacts.
Conversely, moving it toward MAX makes the sensors less
responsive even to large impacts.
You can Initialization the slide bar to the factory setting by
tapping "Initialization".
When you apply impact to the target, it displays the gauge
corresponding to the impact.
At this time, the number of the sensor that is responding also
lights up.
5 - 1 - 3 - 2 Fig. 01
