23
Starting up New Machine Online (Initial Setup)
1
2
3
4
5
6
7
8
9
10
11
12
13
When replacing the board with a new one due to failure or other reason, or when taking over
registration from an old machine, the following procedure is required.
* Note that regis t r ation c annot be t aken over f rom "DA R T SL I V E" to "DA R T SL I V E3",
" DA R T SL I V E3" to " DA R T SL I V E", " DA R T SL I V E2" to " DA R T SL I V E3", " DA R T SL I V E3" to
"DARTSLIVE2", "DARTSLIVE" to "DARTSLIVE2", or "DARTSLIVE2" to "DARTSLIVE", since they
have different I/O boards.
Connect "DARTSLIVE3" to the network and power it on.
STEP
1
STEP
2
It opens the initial setup screen. (4-3 Fig. 01)
Tap "Transfer registered machine data".
If the menu screen appears instead of initial setup screen, the network may be
improperly connected.
See "6 Troubleshooting".
4 - 3 Fig. 01
STEP
3
Enter all of the following: "Registered Dealer ID", "Registered Dealer PASS (PIN)",
"Original Machine ID", and "Registered Shop ID". Tap "All Entered".
4 - 3 Fig. 02
4 - 3 Activation for Taking Over Registration (From Old I/O Board to New I/O Board)
