WIRELESS CAMERA KIT
USER GUIDE
USER005 REV B
Dart Systems Limited,
Environment House, First Avenue, Westfield Ind Est, RADSTOCK, Somerset, BA3 4BS
Web:
Company Registered in England No: 5395971
VAT Registration No. 851 0645 43 Page
4
of
15
Tel: +44 (0) 1761 404 870
Fax: +44 (0) 1761 404 871
2. Quick Start Guide
1. Power on the Monitor and ensure that Channel 2 is selected using the CH1/2 button on the
LEFT keypad. (n.b. interference will be displayed until the camera is switched on.)
2. Ensure Camera is fitted securely to the relevant accessory. Power on the Camera, the
pushbutton is illuminated when the camera is on.
3. Allow up to 15 seconds for the Camera and Monitor to Synchronise, in this time black banding
or half screen may be observed.
4. If recording of video is required then insert an SD card into the Recorder slot and refer to the
DS100-M manual for further information.
5. The camera head can be tilted anywhere between the two extremes shown, this can be done
on the fly whilst in use or set before use if the camera is to be stationary.
On/Off
Switch
SD card
slot
On/Off
Switch
CH1/2
