March 2016
CLEANING - NOTE:
It is important to check the machine daily. Checking the machine regularly can avoid serious accidents.
Stop using if user feels that there are some problems with the unit. Check the situation of the machine before and after
using every day.
Before using: Is the machine tilted?
Is the control panel damaged?
During use: Is there a strange smell or vibration noise?
Is the
fl
ame color of burner normal? Any light back or
fl
ameout?
1. Before cleaning, please turn off all gas valves.
2. Please clean the burners and tray for odds and ends regularly.
3. Clean the stainless steel surface with warm soapy water every day and rinse it completely. During cleaning, do not
clean the stainless steel surface with abrasive detergent, brush or scraper etc. The residual iron scale may cause
rusting.
4. Do not clean the surface with chlorine cleanser (bleach, hydrochloric acid etc.). Do not clean the
fl
oor where the
device locates with corrosive substance (e.g. KCL).
5. Clean the dirt on the burners and baf
fl
e regularly.
6. Do not modify the ventilation volume needed during combustion.
7. Accumulation of the iron substance (e.g. Material that formed by iron rust dissolving in water in the pipe, especially
when the device is not used for a long time.). Therefore, to avoid accumulation of such substance, clean the food swill
that is dif
fi
cult to clean with stainless steel scraper or brush containing no iron substance instead of steel brush.
8. Accumulation of substance containing acidic ingredient, e.g. vinegar, lemon juice, spices, salt etc. Thus, please keep
these substances away from long contacting with the stainless steel accessories. Vapor of acid solution will damage
the surface of the device seriously.
9. A complete cleaning every day will ensure a good service and extend the service life of the unit. Clean the unit with a
wet towel containing suds or a detergent, rinse it with water and dry it with a clean cloth. Do not clean the device with
steel brush, which may cause rust. Similarly, do not contact the unit with substance containing iron.
10. Splotch and abrasion of the stainless steel surface: Scrape and black stain can be cleared away by arti
fi
cial sponge.
During cleaning, the direction should be the same as the polishing.
11. Rusting: To remove the rusting, please contact the industrial detergent manufacturer to
fi
nd a proper detergent to
remove such rusting. Industrial rust removal products may do. After cleaning, rinse it with clear water. If necessary,
neutralize the residual acid chemical compound with alkaline detergent.
12. To avoid rusting of the unit, please make sure that the residual salt inside or outside the device is cleared away.
13. After cleaning, to avoid short-time incomplete combustion, the
fi
re hole of the burner should be clear.
14. If not going to use the item at any time, please turn off the gas valve upstream the device or the power main switch.
15. If not going to use the device for a long time, please clean the stainless steel surface with a gasoline cloth and store it
in a well-ventilated area without corrosive gas.
16. 90% of the device is metals (stainless steel, iron, aluminum, galvanized metal sheet) which can be recycled by
appointed treatment plant according to environmental standards of the equipment installation countries.
