Alpha·Omega Engine™ to add natural compression,
organic harmonic enhancement, and saturation
ranging from mild overdrive to high gain bass rage.
The Alpha·Omega Engine operates before the clean
section (you can therefore use the 6-Band Active EQ for
additional tone shaping).
BITE
: Boosts high mids (2.8kHz) for additional
presence and definition.
GROWL
: Shelving Bass Boost for a fatter tone and
increased low end saturation.
COMPRESSION
: This knob controls the amount of
dynamic compression added to the Alpha·Omega
Engine. The make up gain is adjusted automatically.
The compression can be turned off or assigned using
the Darkglass Suite.
DRIVE
: This knob controls the amount of distortion
that the Alpha·Omega Engine will deliver. It will
change from a soft, warm overdrive to a massive and
modern distortion sound.
LEVEL
: Use this knob to control Alpha·Omega Engine’s
output volume.
BLEND
: Use this knob to mix between the Clean signal
and the DIstortion signal (Alpha·Omega Engine).
MOD
: Selects or mixes between the two distinct
distortion circuits: Alpha is punchy, tight with a lot of
definition, whereas Omega is simply brutal and raw.
GAIN
: Use this knob to change the volume of the
signal before the Active 4 Band EQ. You can set it low
for ensuring the cleanest operation possible or set it
higher for a more aggressive growl.
BASS
: +-12dB at 80Hz. Use this knob to change the
low-end content of the signal.
MIDS
: +-12dB at 250, 500, 1.5K and 3Khz. This graphic
EQ control the mid content of the signal.
TREBLE
: +-12dB at 5kHz. Use this knob to change the
high content of the signal.
MASTER : Use this knob to control the overall volume
of the amplifier.
MUTE : Use this push button to mute the amplifier.
