background image

WARNING

· No user serviceable parts inside the amplifier. Do not 

open the amp.

 

· Never use the amp at a high moisture environment or 

near liquids. 

· The Alpha·Omega 900 can deliver more than 115 dB of 

power. Exposure to this level of sound can damage 

your hearing. Use proper hearing protection if you will 

be exposed.

· The Alpha·Omega 900 can deliver more than 900 

Watts. Be sure that your speaker cabinet is able to 

deliver that power. You can reduce the output of the 

amp by selecting the 2

 mode on the rear panel (by 

the SpeakON output jack). 

· Do not cover the vent holes. The Fan and vent holes 

are part of the cooling system of the amp. Covering the 

vent holes can damage the power amp by overheating 

it.

 

· Don´t use an instrument cable as speaker cable. An 

instrument cable is not designed to deliver the type of 

power signals sent from the amplifier to the speaker.

TROUBLESHOOTING

· The button controls do not react: check if the 

footswitch is connected. If you do not want to use the 

footswitch, you have to unplug the cable from the rear 

back of the amp.

· The amp does not turn on: check if the power cable is 

connected and if you have power on the wall. 

· The sound is low: check your speaker cable. Never use 

instrument cable.

· The sound is distorted or too high: check if the passive 

active switch match your bass.

Summary of Contents for Alpha-Omega 900













Reviews: