background image

SAFETY WARNINGS

KEEP ALL FLAME AND HEAT 
SOURCES AWAY FROM THE 
FABRIC.

UNDER NO CIRCUMSTANCES 
SHOULD ANY NAKED FLAME 
SOURCES BE USED NEAR THE 
AWNING.

KEEP CAMP FIRES AWAY FROM 
THE AWNING.

KEEP A LOOK OUT FOR ANY 
AIRBORNE BURNING EMBERS 
THAT MAY COME INTO CONTACT 
WITH THE TENT.

KEEP A FIRE EXTINGUISHER OR 
WATER BUCKET NEARBY.

DO NOT OPERATE ANY DEVICE 
WHICH BURNS FUEL INSIDE 
THE AWNING WHILE WALLS ARE 
ATTACHED.

KEEP EXITS CLEAR.

DARCHE RECOMMENDS FIXING 
ALL GUY ROPES AT ALL TIMES 
WHEN AWNING IS IN USE.

REMAIN CAUTIOUS AROUND GUY 
ROPES TO PREVENT INJURY.

ENSURE CHILDREN ARE 
SUPERVISED AROUND THE 
AWNING AT ALL TIMES.

ECLIPSE 270° AWNING

CARE INSTRUCTIONS

CLEANING

Clean with cold water and a soft bristle brush. Do not use 
soaps and detergents. Do not expose to petrol, diesel, oils or 
chemicals of any nature.

STORING

Correct storage is vital for the longevity of your Eclipse 
Awning. If on occasion the awning is required to be stowed 
wet, it is essential it is unpacked and dried as soon as 
possible. Rot, mildew damage and incorrect storage is not 
covered under warranty. 

STRUCTURAL INTEGRITY

The Darche Eclipse Awning has been designed for general 
camping use under normal conditions. Always ensure all 
rafters are supported by leg poles provided and all guy ropes 
are anchored correctly. It may be necessary to re-adjust guy 
ropes and pegs at times to maintain the structural integrity 
of the awning.

To avoid chances of personal injury and or  

property damage, Darche highly recommends  

the Eclipse Awning should NOT be erected  

during windy conditions. 
Damaged caused by wind and or adverse weather 

will not be covered under warranty.

VEHICLE FITTING

Darche recommends using an experienced aftermarket 
4x4 accessories fitter to mount the Eclipse Awning to 
your vehicle. Fasteners and fixing connections should 
be checked regularly on both the awning and roof rack 
to ensure the awning is always mounted securely to your 
vehicle roof rack.

Prolonged travelling on uneven rough or corrugated terrain 
will require more frequent inspections.

Ensure the unsupported ends of the awning  

do not exceed 500mm
Darche takes no responsibility for the fitment of  

the Eclipse Awning to any vehicle or roof rack. 

Darche’s Eclipse Awning brackets have been designed to fit 
most common roof rack configurations. However, with the 
ever increasing number of roof rack designs now available it 
is difficult to supply a mounting bracket to accommodate all.
If in doubt please visit your roof rack specialist for specific 
roof rack mounting options and advice on load capacities.

WATERPROOFNESS

Darche has taken great care in its refined raw material 
selection, design and development of their tents and 
awnings in regards to waterproofness. With the use of 
water repellent coatings and High Frequency seam sealing, 
Darche have strived to eliminate water ingress as best as 
possible on its recreational tents, shelters and awnings. 

Unfortunately with the addition of zips and multiple layer 
seams, wind driven rain may cause water to ingress at 
times. To minimise this, ensure all rain flaps are adequately 
covering the zips.

Seams connecting multiple layers of fabric could leak at 
times depending on weather conditions and location. A 
quick and easy solution is to rub a softened wax stick over 
the affected area.

USING THE OPTIONAL WALLS 

The zip on awning walls will provide a sheltered / protected 
area around the awning. When attached to the awning, they 
are designed to create a shaded area and help reduce dust. 

IN WINDY CONDITIONS IT IS HIGHLY RECOMMENDED 
NOT TO ERECT THE AWNING AND WALLS AS PERSONAL 
INJURY AND OR PROPERTY DAMAGE MAY OCCUR.

Summary of Contents for ECLIPSE 270









Reviews: