16
In the state of data storing, after the screen is automatically shut down, the pulse sound
indication would be off for saving power.
When the storage space is full, it displays “Memory is full” on the screen, and then shut
down in a few seconds. But it will still display “Memory is full” by the next time you turn on
the device on the purpose of warning the user, if press any button (power on/off excluded)
again, it will enter the measuring interface.
Stored data transmission setting
Firstly, please install the affiliated software into the computer, and then two icons would
appear on the desktop after installation. The icon of SpO2 is a program for receiving real-
time data which is shown as figure 13; the icon of SpO2 Review is a program for receiving
stored data which is shown as figure 14.
Fig.13 SpO2 program
Fig.14 SpO2 Review program
Connect the device with computer by the data line which is affiliated with the device, then
double click"SpO2 Review “icon to open"SpO2 Review" program, click the ‘New Session’ Icon
in the software, enter the patient data and then click ‘ok’. The Software will then display
“device connected, waiting for data”.
On the main menu interface, press the "up button" or "down button" to select "Upload".
Press the "left button" or "right button" to select "on" then the data will be transferred to
your computer.
In the state of storing, it is not applicable for the users to upload the stored date to
computer.
When the stored data is being uploaded, "ON" will be shown behind the upload item.
When the upload of stored data is finished, "OFF" will be shown behind the upload item.
