USB3-FRM13_K Users Manual (Rev 1.1)
-
37
- http://www.daqsystem.com
(4)
“# of Line” button
It is a Line number, you can select 1 ~ 65536.
(5)
“CC Cfg” button
You can select a CC(camera control) signal among CC1 ~ CC4.
Camera Option can be selected from Camera Control signal lines (cc1 alt ~ cc4 alt). If you
select “cc1 alt” or “cc2 alt” and click the “CC Cfg” button, the trigger cycle set as Delay,
Width, and Blank is output as CC1. The “cc3 alt” mode does not currently implement the
trigger mode, and when “cc4 alt” is selected, it operates at internal 50MHz. Ref. When
“Clock” is selected, it operates with a signal from REV+/- (refer to Section 2.3.4 J3
connector) instead of 50MHz.
(6)
“Rolling” toggle
If the rolling mode is true, the frame data is updated regardless of the GetFrame function.
In other words, the latest data is retrieved by always updating, not by updating the data by
calling the GetFrame function.
