Ordercode: D6531
VCB-6
Description of the device
Features
•
Line voltage: 100V
•
Power consumption: 6W
Do not connect speakers which exceed 6W
•
Material: ABS
•
Mounting: Flush, surface
•
Mounting hole: Ø 48 mm
•
Dimensions: 80 x 80 x 30 mm (LxWxH)
•
Weight: 0,1 kg
Optional accessories:
D6536 – CB-1 (1-unit cover box for volume controller)
Installation
Remove all packing materials from the VCB-6. Check that all foam and plastic padding is removed.
Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Fig. 01
Set Up and Operation
Make sure that you connect the appropriate cables to the appropriate connectors.
01)
Connect the main feed cable (+) from the amplifier to the connector # 1 – IN.
02)
Connect the common cable (-) from the amplifier to the connector # 2 – COM.
03)
Connect a common cable (-) to the connector # 3 – COM, and connect it to the common
connector on your speaker.
04)
Connect a main feed cable (+) to the connector # 4 – OUT, and connect it to the main feed
connector on your speaker.
05)
The VCB-6 is equipped with the mute function. Connect the common cable (-) from the emergency
switch to the connector # 5 – 0V, and the main feed cable (+) from the emergency switch to the
connector # 6 – 24V.
06)
Now, if you press the emergency button, the circuit will open and the speaker output will be muted.
5
Summary of Contents for VCB-6
Page 8: ... 2015 DAP Audio ...