background image

 

Ordercode: D6531 

VCB-6

 

 

Return Procedure 

 

Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. 

Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned 

without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. 

Call Highlite 0031-455667723 or mail 

[email protected] 

and request an RMA prior to shipping the fixture. 

Be prepared to provide the model number, serial number and a brief description of the cause for the 

return. Be sure to properly pack fixture, any shipping damage resulting from inadequate packaging is the 

customer’s responsibility. Highlite reserves the right to use its own discretion to repair or replace 

product(s). As a suggestion, proper UPS packing or double-boxing is always a safe method to use. 

 

Note: If you are given an RMA number, please include the following information on a piece of paper 

inside the box: 

01)

 

Your name 

02)

 

Your address 

03)

 

Your phone number 

04)

 

A brief description of the symptoms 

 

Claims 

The client has the obligation to check the delivered goods immediately upon delivery for any short-

comings and/or visible defects, or perform this check after our announcement that the goods are at their 

disposal. Damage incurred in shipping is the responsibility of the shipper; therefore the damage must be 

reported to the carrier upon receipt of merchandise. 

It is the customer's responsibility to notify and submit claims with the shipper in the event that a fixture is 

damaged due to shipping. Transportation damage has to be reported to us within one day after receipt 

of the delivery.  

Any return shipment has to be made post-paid at all times. Return shipments must be accompanied with 

a letter defining the reason for return shipment. Non-prepaid return shipments will be refused, unless 

otherwise agreed in writing. 

Complaints against us must be made known in writing or by fax within 10 working days after receipt of the 

invoice. After this period complaints will not be handled anymore. 

Complaints will only then be considered if the client has so far complied with all parts of the agreement, 

regardless of the agreement of which the obligation is resulting. 

 

 

  

 

 

   

 

Summary of Contents for VCB-6









Reviews: