14
TCD-100BT
Odercode: D1257
MP-3 Program Play
01)
Make sure the unit is in
CD mode
when using the remote control.
02)
Press the
Stop (06, 47)
button, the playback will stop.
03)
Press the
Prog (24, 48)
button, the player will enter the program mode.
04)
Select the desired folder by using the
Select (34)
buttons, the
Rev (04, 51)
or the
Cue (05, 55)
button,
then press the
Prog (24, 48)
button again.
05)
Select the desired track by using the
Select (34)
buttons, the
Rev (04, 51)
or the
Cue (05, 55)
button,
then press the
Prog (24, 48)
button again. The selected folder and track will be added to the
program sequence.
06)
Repeat step 3 and 4. Until all tracks are programmed.
07)
Press the
Play/Pause (07, 46)
button to start the program play from the first selection.
08)
Press the
Stop (06, 47)
button during program play to stop playing.
09)
Press and hold the
Prog (24, 48)
button more than 3 seconds to cancel the program mode and
erase All the current program contents.
Loop play
01)
Press the
A-B (60)
button to set the loop start point, the LOOP indicator will flash on the LCD.
02)
Press the
A-B (60)
button to set the loop end point. After the end point is set, the playback will enter
the loop play from start point to end point repeatedly.
03)
Press the
A-B (60)
button to stop the loop function immediately.
Using the Find function:
Press the
Find (43)
button once to start track search.
You can change the Search character by using the
Rev
(04, 51)
and
Cue
(05, 52)
buttons.
If you find more than one track starting with the same search character then press and hold either
Rev
(04, 51)
or
Cue
(05, 52)
button for three seconds. The search character starts blinking.
Now you can scroll through all tracks starting with the same search character by using the
Rev
(04, 51)
and
Cue
(05, 52)
buttons.
Exit the scroll mode by pressing and holding the
Rev
(054,
51)
or the
Cue
(7, 37)
button for three seconds again.
Press the
Find (43)
button again to browse through your folders.
You can browse through your folders by using the
Rev
(04, 51)
and
Cue
(05, 52)
buttons.
Exit the find mode by pressing the
Find (43)
button again.
Summary of Contents for TCD-100BT
Page 19: ...18 TCD 100BT Odercode D1257 Notes...
Page 20: ...2014 DAP Audio...
