10
TCD-100BT
Odercode: D1257
28)
CD – USB – SD/MMC LCD
LCD CD – USB – SD/MMC Display
29)
Antenna connector
Connect your FM antenna to this input.
30)
Bluetooth RCA L/R Output
Connect to the line input of your Mixer.
31)
Tuner RCA L/R Output
Connect to the line input of your Mixer.
32)
CD – USB – SD/MMC LCD RCA L/R Output
Connect to the line input of your Mixer.
33)
AC Inlet with integrated fuse holder
This connector is meant for the connection of the supplied main cord. Connect one end of the
powercord to the connector, the other end to the mains, and then turn on the power switch to operate
the unit.
Note:
Please make sure that the supply voltage matches the operation voltage before connecting the
unit to mains.
Replace the fuse only with a fuse of same specification (T630mA).
35)
Direct
Button
The direct function allows you to manually give in a radio frequency using the select buttons. For more
information, see the section Tuner Operations on page 14.
36)
+10
Button
When selecting radio stations stored in memory you can use the +10 button to move up 10 presets. E.g. if
your actual preset is 5, pressing the +10 button will select Preset 15.
41)
Play1 Button
By pressing this key once, the player will only play one track once.
42)
Speed - Button
Press this key to decrease the speed of the music.
43)
Find Button
Press the Find button once to start track search, twice for folder search. Pressing the button again will exit
find mode. See the section on page 14 for more info.
44)
Mute Button
Use to mute the output.
45)
Nor. Button
Press this key to recover normal speed.
48)
Prog
MEM
Button
If the TCD-100BT is in
CD mode
(
CD (9)
LED is lit): Stop playback and press the
Prog
button, the player will
enter the program mode. For more information, see the section CD/MP-3 Operations on page 12-14.
If the TCD-100BT is in
Tuner mode
(
Tuner (12
) LED is lit), This button let’s you store your favorite radi ostations
in up to 60 memory locations. For more info see Tuner Operations on page 14.
49)
ASM
Button
If the TCD-100BT is in
Tuner mode
(
Tuner (12)
LED is lit), Pressing and holding this button for more then 1
second starts ASM. If ASM is activated, the TCD-100BT will scan the FM band for stations and
automatically store them in memory. If you decide to exit ASM before the search is finished, press the
ASM button again.
Summary of Contents for TCD-100BT
Page 19: ...18 TCD 100BT Odercode D1257 Notes...
Page 20: ...2014 DAP Audio...
