10
Mode Selection
The three-position, recessed Mode Select switch (located on the rear panel) configures the amplifier for
Stereo, Parallel or Bridged Mono Mode. Amplifiers are factory set to Stereo Mode.
Stereo Mode
In Stereo Mode, both channels operate independently, with their input attenuators controlling their
respective levels. Signal at Channel A's input produces output at Channel A's output, while the signal at
Channel B's input produces output at Channel B's output.
Fig. 4
Important !!!
Absolute minimum nominal load Impedance for stereo operation is:
STAGE AMP 2.2, 2.6, 4.0 and 4.6:
2 Ohm per channel.
Parallel Mode
When set to Parallel Mode, a signal applied to Channel A's input will be amplified and appear at outputs
of both Channels A and B.
Fig. 5
Important !!!
Absolute minimum nominal load Impedance for parallel operation is:
STAGE AMP 2.2, 2.6, 4.0 and 4.6:
2 Ohm per channel.
Summary of Contents for Stageamp 2.2
Page 18: ...16 STAGE AMP Block Diagram...
Page 21: ...2009 DapAudio...
