9
20) Footsw
You can connect a Footswitch to this jack. The footswitch makes it easy to switch between singing/playing
with an effect and talking to a crowd without changing the effect settings on your mixer. Simply push the
footswitch and you can talk without an effect examp Delay, Hall, etc an instant.
21) PH LEVEL
22) Phone
You can connect a pair of headphones with an impedance of 32 - 600 Ohm to this Stereo Phone jack.
Balanced 1
/4” TRS socket, wired as Tip=left, Ring=right and sleeve = ground.
23. POWER LED
The blue Power LED lights when the PowerMix is turned on. If, after switching the PowerMix on, the LED
does not light, make sure that the mains plug is plugged in correctly. If the LED still doesn’t light up, please
contact your DAP Audio dealer.
24. Phantom Power LED
After switching on the mixer, the yellow LED above the switch must not light up. In this case, both balanced
and unbalanced microphones can be connected. These microphones may be damaged.
25. Phantom Power
You can press this button to turn the
PHANTOM POWER +48 V
on.
Do not connect any unbalanced
microphones with the microphone phantom power switched on. The yellow LED PHANTOM POWER +48 V
(
24
) lights up.
Summary of Contents for Power Jig 6
Page 1: ...Power Jig 6 ORDERCODE D2230...
Page 16: ...2005 DapAudio...