7
22)
Zone output terminal
This output terminal connects to the speaker lines. Total speaker wattage is up to nominal power for
zones 1-4. When using a zone selector, low-impedance speakers cannot be used. Default is constant
voltage 100V output.
23)
Output terminal for auxiliary loudspeaker
The terminal is meant for the connection of a small external loudspeaker that gets driven by an internal
auxiliary power amplifier, providing a nominal output of 1 watt. Only the mixed audio signal coming from
"AUX IN" is included in the output signal. In addition, the output signal is controlled only by the
volume control of INPUT 5, music level control (
10
).
24)
"Priority" terminal
When short-circuiting these terminals (i.e. by means of using an electrical switch), the audio signals
coming from "AUX IN", are attenuated while the signals coming from IN2, IN3 and IN4 are gaining
priority.
25)
Input "Tel. paging"
The terminals input lets you connect to a telephone signal (600 ohms). The input features the "Voice
Priority" function, which overrides all other input signals once, a telephone message is sent. If you want
Summary of Contents for PA180
Page 1: ...PA180 ORDERCODE D6112...
Page 8: ...6 21 Output terminals These 5 terminals allow connecting speakers...
Page 13: ...11 Set Up Example 1 Fig 4...
Page 18: ...2006 DapAudio...
