DAPAudio PA100CD, User Manual

Page: 9 / 17

7
Operations CD Player
1. Opening and closing of the disc holder
• Turn the unit’s power on. Press the OPEN/CLOSE-button to open the disc holder.
• The disc holder cannot be opened during playback, to prevent playback from being interrupted if the
OPEN/CLOSE button is pressed accidentally. Stop the playback first, then press the OPEN/CLOSE button.
2. Loading CD’s
• Hold the disc by the edges and place it in the disc holder, then press the OPEN/CLOSE button to close the
holder.
CAUTION:
• Do not place any foreign objects in the disc holder and do not place more than one disc in the disc holder
at a time.
• Do not push the disc holder in manually when the power is off, as this may result in malfunction and
damages the player.
3. Selecting Tracks
• Press the SKIP-button to move to next higher or lower track.
• Hold the SKIP button to change tracks continuously at a higher speed.
• When a new track is selected during playback, playback begins as soon as the skip search operation is
completed.
• If the Skip-button
is pressed while at the last track, the first track is selected. In the same way,
If the Skip- button is pressed while at the first track, the last track is selected.
4. Starting Playback
• Press the PLAY/PAUSE button to start playback when you’ve just loaded a new CD or press the
PLAY/PAUSE during the pause condition to restart playback.
5. Playback stoppen
There are two ways to stop playback:
1). Press the PLAY/PAUSE button during playback to pause at that point.
2). Press the STOP button during playback.
6. Pausing
• Press the PLAY/PAUSE button to switch between play and pause.
7. Program Play
1. Press the PROGRAM button, the player will enter the program mode.
2. Select the desired track by pressing the SKIP button, then press the PROGRAM button again. The
selected track will be added to the program sequence.
3. Repeat step 2 operation. A maximum of 20 tracks can be programmed at one time.
4. Press the PLAY/PAUSE button to start the program play from the first selection.
5. Press the program button again during program play to stop playing.
6. Press and hold the program button more than 2 seconds to cancel the program mode and erase all
the current program contents.
8. Repeat
1. Press the REPEAT button, the player will repeat the song, which is playing at the moment.