DAPAudio PA-5500TU, User Manual

Page: 13 / 60

12
PA-5500TU 500W 100V Amplifier
Product code: D6175
Installation of the Batteries
The supplied remote control is delivered without batteries. It accepts 2 x AAA 1,5 V (alkaline) batteries.
To install the batteries:
Press on the battery compartment cover and move it down, to open (Fig. 05).
Insert 2 x AAA 1,5 V batteries into the battery housing (Fig. 06).
Close the battery compartment cover (Fig. 07).
Fig. 05 Fig. 06 Fig. 07
Note: Make sure that you install the batteries with correct polarity orientation.
Connecting to Power Supply
DANGER
Electric shock caused by short-circuit
The device accepts AC mains power at 220–240 V and 50 Hz. Do not supply power at any other voltage
or frequency to the device.
This device falls under IEC protection class I. Make sure that the device is always electrically connected
to the ground (earth).
Before connecting the device to the socket-outlet:
●
Make sure that the power supply matches the input voltage specified on the information label on
the device.
● Make sure that the socket-outlet has ground (earth) connection.
Connect the device to the socket-outlet with the power plug.