DAPAudio PA-530TU, Manual

Page: 7 / 24

6
PA-530TU
Ordercode: D6150
Frontside
Fig. 01
Power switch ON/OFF
Press the button to switch the device ON/OFF.
Tuner/audio player
See section Tuner, page 10 and section Audio Player, page 11.
Master control
Turn the control to adjust the master volume level, according to your preference.
VU meter
The clip LED indicates peak levels at the output of the amplifier. If the red LED frequently blinks or
lights continuously, the output is likely to enter clipping. If this happens, we strongly suggest turning
the
master control (03) to the left, to decrease the master volume.
Headphones 6,3 mm jack IN
Use this connector to connect 6,3 mm jack headphones.
Source selector
Turn the control to set the desired signal source or the built -in audio player/tuner. The available
sources are:
 1. Tuner
 2. USB
 3. Aux
 4. Phone/MP3
Volume control
Turn the control to adjust the volume level of the selected source.
Mic 1 level control
Turn the control to adjust the volume level for input Mic 1.