DAPAudio PA-530TU, Manual

Page: 10 / 24

9
PA-530TU
Ordercode: D6150
Fig. 04
Gain level control – Mic 1
Adjust input level for Mic 1.
Combo input – Mic 1
Combo input for Mic 1. Accepts balanced or unbalanced inputs.
Aux – RCA IN
Connect an auxiliary signal source. The source selector (06) must be set to 3 .
100V/8Ω terminal connector
If you connect a 100V speaker, connect the main feed cable to the 100V terminal and the common
cable to the 0 terminal.
If you connect a low impedance speaker, then connect the main feed cable to the 8Ω terminal and
the common cable to the 0 terminal.
NOTE: Do not connect the 100V and 8Ω speakers at the same time.
24V DC IN terminal connector
This input can be used in mobile applications, such as boats where 120 or 230V AC is not available or
in applications that must continue to operate in case of power shortage. When a 24V DC battery is
connected, the unit will operate on the supplied DC voltage. The amplifier has a built-in charger,
which charges the connected battery.
75Ω FM antenna connector
Connect your FM antenna to this connector.