DAPAudio ORDERCODE D3710, Installation Manual, Page: 7 / 13

5
Installation
Remove all packing materials from the Compact Array. Check that all foam and plastic padding is
removed.
Set Up and Operation
Signal Input
Both Speakon input sockets are wired in parallel. And can be used as either input or for linking through to
other Compact Arrays.
The DAP Audio Compact Array is a flexible speaker systems that can be deployed in ground supported
or suspended applications. The following information will help you set up your Compact Array system
safely and effectively.
Pole and Tripod safety warnings.
When using stands or poles, be sure to observe the following precautions:
Check the stand or pole specification to be certain that the device is designed to support the
weight of the speaker. Observe all safety precautions specified by the manufacturer.
Be certain that the surface on which the system is to be stacked is flat, stable and solid.
Route cables so that performers, production crew, and audience will not trip and topple the
speakers.
Inspect the stand (or pole and associated hardware) before each use and do not use equipment
with worn, damaged, or missing parts.
Do not attempt to place more than two Compact Array loudspeakers on a tripod.
When mounting two compact array speakers on a pole or tripod, internal rigging hardware must
be used to secure the speakers to each other.
Always be cautious when deploying the system outdoors. Unexpected winds may topple the
system. It may be necessary to place additional weight (i.e. sandbags) on the base of the stand
to improve stability. Avoid attaching banners or similar items to any part of a speaker system. Such
attachments could act as a sail and topple the system.
Unless you are confident that you can handle the weight of the speaker, ask another person to
help you get it onto the tripod stand or pole.
One or two Compact arrays may be mounted onto either a DAP D8409 Tripod stand or with the
DAP D8404 pole over its companion subwoofer the DAP D3701 LB-184 subwoofer.