16
NRG-15SA
Product code: D3658
Setup without an Audio Mixer
You can use the NRG-15SA in a setup without an audio mixer and connect it to an active full-range
speaker from the NRG range (NRG-8A/10A/12A/15A). In this setup the active full-range speaker functions
as a mixer, combining all input signals.
To complete the setup, follow the steps below:
Make sure that all devices are switched off.
Use a 3-p XLR cable to connect the combined connector IN A (15) of the active subwoofer to the
3-pin XLR mix connector OUT of the active full-range speaker.
Connect a microphone, a musical instrument, and/or a streaming source device, as necessary, to
the active full-range speaker.
Connect the active subwoofer to the power supply. See 4.6. Connecting to Power Supply on
page 17.
Connect the rest of the devices to the power supply as necessary.
Switch on the active subwoofer. See 5.2. Switching On/Off on page 18.
Switch on the rest of the devices as necessary.
Adjust the gain controls of the external devices as necessary.
Adjust the gain control of the active subwoofer. See 5.6. Adjusting the Gain on page 19.
Fig. 08
Summary of Contents for NRG-15SA V1
Page 23: ...22 NRG 15SA Product code D3658...
Page 24: ...2023 DAP...
