DAPAudio NRG-12A User Manual Download Page 28

 

 

 

27 

 

  

 

 

NRG-12A 

Product code: D3655 

6.6.

 

LED Statuses 

The device has 4 status LED indicators (05) and a clip LED indicator (20). The LED indicators have the 
following statuses: 

 

 

Protect:  

Illuminates when the amp is overloaded. This can happen when 
the input signal is too high or when the ambient temperature is too 
high. Decrease the volume of the connected device 

 

Limit:  

Illuminates prior to the amp clipping and distorting. Adjust the input 
levels so that this LED indicator illuminates only briefly during the 
highest peaks. If you operate the device with this indicator 
continuously on, this will result in degraded sound quality and 
could damage or reduce the service life of the components 

 

Signal:  

Illuminates when signal is present 

 

Power:  

Illuminates when the device is powered on 

 

 

Clip:  

Illuminates when the input signal from the connected microphone 
is too high. Adjust the microphone gain 

7.

 

Troubleshooting 

This troubleshooting guide contains solutions to problems which can be carried out by an ordinary 
person. The device does not contain user-serviceable parts. 

Unauthorized modifications to the device will render the warranty void. Such modifications may result in 
injuries and material damage. 

Refer servicing to instructed or skilled persons. Contact your Highlite International dealer in case the 
solution is not described in the table. 

Problem 

Probable cause(s) 

Solution 

The device does not 
function at all 

No power to the device 

 

Make sure that the device is connected 
to the power supply and switched on 

No sound 

Devices are not paired 

 

Make sure that the device is paired with 
any external device 

Bad connections 

 

Make sure that the connections 
between the device and the external 
devices are correct 

The device does not 
stream sound 

There is no connection to the 
streaming source device 

 

Make sure that the Bluetooth 
functionality on the streaming source 
device is turned on 

The device is still paired to a 
different streaming source device 

 

Terminate the previous connection and 
pair the device with the current 
streaming source device. See 6.3. 
Bluetooth Connection
 

The streaming source device is out 
of range 

 

Move the streaming source device 
closer or remove any obstructions 
between the device and the streaming 
source device 

 
 

 

Summary of Contents for NRG-12A

































Reviews: