DAPAudio NRG-12A, User Manual, Page: 23 / 32

22
NRG-12A
Product code: D3655
Setup without an Audio Mixer
You can use the NRG-12A in a setup without an audio mixer and connect it to a 2
nd
active full-range
speaker NRG-12A. In this setup the device functions as a mixer, combining all input signals.
You can connect a microphone and a musical instrument, as well as stream a signal via the Bluetooth
and output all signals together.
To complete the setup, follow the steps below:
Make sure that all devices are switched off.
Connect a microphone to the combined microphone connector IN (19) as necessary.
Connect a musical instrument to the combined line-level connector IN (18) as necessary.
Connect a streaming source device via the Bluetooth as necessary. See 6.3.1. Pairing with a
Streaming Source Device on page 25.
Connect a 2
nd
active full-range speaker. See 5.2. Connecting Multiple Devices on page 19.
Connect the active full-range speakers to the power supply. See 5.6. Connecting to Power Supply on
page 24.
Connect the rest of the devices to the power supply as necessary.
Switch on the active full-range speakers. See 6.2. Switching On/Off on page 25.
Switch on the rest of the devices as necessary.
Adjust the gain controls of the external devices as necessary.
Adjust the gain controls of the active full-range speakers. See 6.4. Adjusting the Gain on page 26.
Fig. 17