DAPAudio MA-8120, Manual

Page: 7 / 16

6
Ordercode: D6195
MA-8120 Digital Zone Amplifier
Frontside
Fig. 02
Input channel EQ controls
Turn the controls to equalize the input signal. The adjustment range is from -12dB to +12dB at 80Hz
(LOW); 2,5kHz (MID) and 12,5kHz (HIGH) for CH1-4.
Signal indicator
This LED indicates the current input signal.
Clip indicator
This LED indicates overload. If it is on, turn the Trim controls (20/22) on the rear of the MA-8120 to
guarantee undistorted performance.
Output channel selectors
Press the buttons to route each input signal to the selected output channel.
Output channel EQ controls
Turn the controls to equalize the output signal. The adjustment range is from ±15dB at 12kHz (HIGH);
±15dB at 80Hz (LOW).
Output level meter
These LEDs show the current output level.
Clip indicator
This LED indicates overload. If it is on, turn the corresponding volume control to guarantee
undistorted performance.
Protection indicator
This LED indicates amplifier protection, caused by overcurrent or overheating.
Monitor switches
Press the buttons to monitor each output channel by means of the internal monitor speaker (11).
PFL/AFL selector
Select the desired monitor: before (PFL) or after master volume (AFL).
Monitor speaker
Power indicator
This LED lights up when the device is switched on.
Power switch
Press the button to switch the MA-8120 on/off.
Monitor output control
Turn the control to set the monitor level of the monitor speaker.
Output volume controls (output 1-4)
Turn the controls to set the level for each output channel.
Mute buttons
Press the buttons to mute the desired output channel.
Input channel volume (CH1-8)
Turn the controls to set the input level for each channel.