DAPAudio MA-8120, Manual

Page: 11 / 16

10
Ordercode: D6195
MA-8120 Digital Zone Amplifier
Maintenance
The MA-8120 Digital Zone Amplifier requires almost no maintenance. However, you should keep the unit
clean.
Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in
liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Troubleshooting
MA-8120 Digital Zone Amplifier
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
01) If the device does not operate properly, unplug the device.
02) Check power from the wall, all cables, connections, etc.
03) If all of the above appears to be O.K., plug the unit in again.
04) If nothing happens after 30 seconds, unplug the device.
05) Return the device to your DAP Audio dealer.
Product Specifications
Outputs: Power: 4 x 120W
Zones: 4
Tone control: High: 10kHz, Low 100Hz +/- 15dB
100V/70V: Terminals
Line output: Terminals
Inputs: 4 x Mic/Line: XLR & stereo jack connectors
4 x Line: RCA & mono jack connectors
Features: Phantom power: +48V
Tone control: Low 80 Hz, Mid: 2,5kHz, High 12kHz, +/-15dB
Mic input: -60dB - -16dB / 20kOhm, balanced
Line input: -20dB - +4dB / 20kOhm, balanced
Remote input: 0B/600Ohm, balanced
Frequency response: 20Hz–20kHz
THD: < 0,1%
General: Input voltage: 230V AC, 50Hz
Power consumption: 500W
Power connection: IEC
Fuse: T4AL/250V
Dimensions: 482 x 345 x 89 mm (LxWxH)
19 inch x 2HE
Weight: 6 kg
Design and product specifications are subject to change without prior notice.
Website: www.Dap-audio.info
Email: service@highlite.nl