DAPAudio K-18BA, Product Manual

Page: 10 / 14

8
Phase switch (16)
This switch allows you to reverse the phase of the subwoofer if necessary.
IEC power inlet and fuse (17)
This connector is meant for the connection of the supplied main cord. Connect one end of the power
cord to the connector, the other end to the mains, and then turn on the power switch (52) to operate
the unit.
Note: Please make sure that the supply voltage matches the operation voltage before connecting
the unit to mains. Replace the fuse only with a fuse of same specification (T8A).
Mains Switch (18)
Do not supply power before the whole system is set up and connected properly.
Setup example
Fig. 4