Ordercode: D4175 / D4176 / D4177 / D4178/D4179
10
HP-500 / HP-900 / HP-1500 / HP-2100/ HP-3000
D4178: HP-2100
Fig. 09
D4179: HP-3000
Fig. 10
Air exhaust
Do not block the air exhaust as it may cause overheating and/or other serious damage.
IEC power connector IN 230V-50/60Hz
400W/650W/1000W/1300W/1800W
Ground/earth connection
Auto Fuse, 3A, resettable
CH 2, 3-pin XLR connector IN (unbalanced/balanced)
Connect low impedance equipment with balanced/unbalanced line level outputs.
CH 2, Speakon connector OUT
Connect the device to speakers.
Mode switch
With this switch you can choose between the 3 operation modes: bridge, parallel and stereo.
STEREO: 2 inputs (channel 1 and 2) and 2 outputs are used.
PARALLEL: 1 input (channel 1) and 2 outputs are used.
BRIDGE: 1 input (channel 1) and 1 output are used (only use at 8Ohm).
Bridge Speakon connector OUT
Connect the device to speakers in Bridge mode.
CH 1, 3-pin XLR connector IN (unbalanced/balanced)
Connect low impedance equipment with balanced/unbalanced line level outputs.
CH 1, Speakon connector OUT
Connect the device to speakers.
Auto Fuse, 6A, resettable
Auto Fuse, 10A, resettable
Auto Fuse, 15A, resettable
Auto Fuse, 20A, resettable
Summary of Contents for HP-2100
Page 20: ... 2017 DAP Audio ...
