27
EDGE EHS-1
Product code: D1475B
Squelch
In this menu you can set the squelch threshold. The squelch threshold is pre-set at the factory and
normally needs no further adjustment. In case the receiver picks up other signals besides the signal of the
transmitter, follow the steps bellow. To eliminate the interference, increase the squelch threshold for the
respective channel.
Turn the control (02) to select SQUELCH.
Press the control (02) to edit.
Turn the control (02) to set the value. The adjustment range is 1–10.
Press the control (02) to confirm.
Note:
Increasing the squelch threshold decreases the transmission range, which may cause loss of signal from
the transmitter. Always adjust the squelch control to the lowest possible setting.
Tone Key
In this menu you can set the tone key. The receiver uses it to identify the transmitter and its battery status.
Turn the control (02) to select TONEKEY.
Press the control (02) to edit.
Turn the control (02) to select one of the 2 options:
●
ON: Tone key is on
●
OFF: Tone key is off
Press the control (02) to confirm.
Summary of Contents for EDGE EHS-1
Page 13: ...12 EDGE EHS 1 Product code D1475B Dimensions Fig 05...
Page 39: ...38 EDGE EHS 1 Product code D1475B...
Page 40: ...2023 DAP...
