DAPAudio DS-TT-750-USB, Manual

Page: 7 / 17

5
Description of the device
Features
The DS-TT-750-USB is a belt drive turntable with USB connection for PC interface:
Overview DS-TT-750-USB
Fig. 1
1. SD Slot
Slot for inserting SD/MMC card. The contacts of the card must point downwards. The unit cannot read
cards with a capacity of more than 4GB. The unit is not compatible to SDHC cards and only supports
the MP3 format.
2. USB Slot
Allows the connection of a USB stick with a maximum capacity of 4G.
3. Turntable Platter
The platter is equipped with a slip map. This makes it easier to manipulate the record for scratching.
4. Center Spindel
5. Motor Off LED
Use to turn the turntable motor On or Off. When switched On, the LED lights.
6. Counterweight
Adjustment creates the proper downward pressure of the stylus to the record. For instructions on
installing and adjusting the counterweight see the chapter Assembly of the turntable at page 8/9.
7. Stylus Pressure Ring
The stylus pressure ring is used to set the perfect stylus pressure for the installed cartridge. see the
chapter
Assembly of the turntable at page 8/9 for more info.
8. Anti-skate Knob
This applies inward force to the tonearm so it doesn’t skip outward across the record due to the
centrifugal force created by the spinning of the record. Cartridge manufacturers usually specify the
proper settings for the anti skating knob. Also see the section
Assembly of the turntable on page 8/9
for more info.