6
Backside
Fig. 2
19)
Record RCA Unbalanced Out
27)
Channel 4 L2 RCA Input
20)
Channel 4 L1 RCA Input
28)
Channel 3 L2 RCA Input
21)
Channel 3 Level Selector
29)
Channel 3 PH1L1 RCA Input
22)
Channel 2 Level Selector
30)
Channel 2 L2 RCA Input
23)
Channel 1 L1 RCA Input
31)
Channel 2 PH1/L1 RCA Input
24)
GND
32)
Channel 1 L2 RCA Input
25)
AC Inlet with integrated fuse holder
33)
Mic 2 Jack Unbalanced Input
26)
Master RCA Unbalanced Out
Installation
Remove all packing materials from the DS-CM-4. Check that all foam and plastic padding is removed.
Connect all cables.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
Functions
1. MIC
Electronically balanced XLR-type input for connecting low impedance
microphone. The input has exremely low noise and hum processing. When
connecting a microphone make sure that the pin assignment
is correct. Always make sure to read the manual of the microphone you want to
connect. The XLR- input is not suitable for connecting an additional mixing
console, FX- unit, etc. You have to use the LINE-inputs, when connecting this kind
of equipment.
Note:
When connecting signal sources, please make sure that the corresponding
channel faders and the master faders are at minimum settings. Otherwise
unpleasant plug-in noise can occur.
2. MIC Channel ON Switch
Use this switch to enable the Mic channel.
3. DJ MIC Level
Controls the volume of the Microphone channel.
Summary of Contents for DS-CM-4
Page 1: ...DS CM 4 ORDERCODE D2180...
Page 15: ...2009 DapAudio...
