11
Replacing the crossfader
1.
Unscrew the fader(B) screws.
Do not touch the innerscrews(C).
Carefully remove the old crossfader
and unplug the cable.(D)
2.
Plug in the new
Crossfader,
attach the cable (D)and place the new
Crossfader
back in the mixer.
3.
Screw the
Crossfader
into the mixer using the fader plate screws.
4.
Replace the fader knob.
Fig. 3
Troubleshooting
DAP Audio-CD-Player DS-CM-40
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
1.
If the device does not operate properly, unplug the device.
2.
Check power from the wall, all cables, connections, etc.
3.
If all of the above appears to be O.K., plug the unit in again.
4.
If nothing happens after 30 seconds, unplug the device.
5.
Return the device to your DAP Audio dealer.
Summary of Contents for DS-CM-4
Page 1: ...DS CM 4 ORDERCODE D2180...
Page 15: ...2009 DapAudio...
