DAPAudio DS-380TL, Manual

Page: 10 / 14

8
5. Selecting Tracks
• Press the SKIP-button to move to a higher or lower track.
• Hold the SKIP button to change tracks continuously at a higher speed.
• When a new track is selected during playback, playback begins as soon as the skip search operation is
completed.
• If the Skip-button is pressed while at the last track, the first track is selected. In the same way,
If the Skip- button is pressed while at the first track, the last track is selected.
6. Starting Playback
• Press the PLAY/PAUSE button during the pause or cue condition to start playback, the PLAY indicator
lights.
• The point at which playback starts is automatically stored in the memory as the cue point. The CD
Player then returns to the cue point when the CUE button is pressed.
Fig. 3
7. Stop Playback
There are two ways to stop playback:
1. Press the PLAY/PAUSE button during playback to pause at that point.
2. Press the CUE button during playback to return to the cue point and enter pause condition.
Fig. 4
8. Pausing
• Press the PLAY/PAUSE button to switch between play and pause.
• The play indicator flashes when the pause mode is set.
• Playback resumes when the PLAY/PAUSE button is pressed again.
9. Setting a Cue Point
• Press the PLAY/PAUSE button to switch between play and pause.
• The play indicator flashes when the pause mode is set.
• Turn the Shuttle wheel to go to your desired CUE point.
• Press the PLAY/PAUSE button again and your CUE point has been stored and the CD will continu.
10. Cueing
• "Cueing" is the action of preparing for playback.
• Press CUE button, the player will enter CUE-Mode, the playback returns to cue point and enter pause
condition, the CUE indicator lights up and the PLAY indicator flashes. When PLAY/PAUSE button is
pressed, play starts from the cue point.
• When the track search operation is completed after pressing the SKIP buttons, the player automatically
finds the position at which the sound starts and cues there (Auto Cue).
• If the CUE button is pressed after the search operation or the scanning operation, the playback returns
to the cue point and enters pause condition.