DAPAudio DCL-2, Manual

Page: 9 / 16

7
2. CH-SEL
Press it shortly to select the channel to be adjusted, and the corresponding information is showed on the left
bottom of the LCD. In Stereo Mode, LCH and RCH can be selected.
In Mono Mode, Comp+Sub or Two Brand Comp, 3 channels LCH, RCH and Sub can be selected.
Press Reset button longer and then the system is reset to factory default setting.
3. Low Cut / Notch
Press it to enter the sub-menu of Low Cut and Notch.
In this case, turn encoder 4 to select one of the following six sub-menus: Low Cut Switch
Low Cut FLT
Notch Switch
LQ Notch FLT
MQ Nothc FLT
HQ Notch FLT
Press the button again and then turn encoder 4 to adjust the value of the corresponding sub-menu
The adjustment range of Low Cut: 20 Hz – 200 Hz, step 10 Hz
The adjustment range of Notch: 40 Hz – 110 Hz, step 5 Hz
4. Lock
First press it about 3 seconds to lock all the function buttons and the information Lock is shown in the LCD.
Press it again, then all the buttons resume to its original