DAPAudio D6175, User Manual

Page: 14 / 60

13
PA-5500TU 500W 100V Amplifier
Product code: D6175
5. Setup
Warnings and Precautions
Attention
Connect all data cables before supplying power.
Disconnect power supply before connecting or disconnecting data cables.
When the PA-5500TU is not connected to other devices, it functions as a stand-alone device. It can be
operated manually or with an infrared (IR) remote control.
For more information about the control modes, refer to 6.2. Control Modes on page 17.
Turning On/Off
The device has a power switch.
● Set the power switch (03) to ON position to turn on the device.
● Set the power switch (03) to OFF position to turn off the device.
Make sure that the device is turned off with the power switch (03) when the device is not in use, to save
energy.
Note: The alarm function does not work when the device is turned off.
Software Updates
When a new software update is available, it will be downloaded and installed automatically the next
time the device is on and connected to the internet. Do not turn the device off when the software is
being updated.
Network Setup
The PA-5500TU can be connected to a computer, laptop, tablet or smartphone with a wireless module
(Wi-Fi). It is also possible to connect the devices with a CAT-5 cable (LAN).
Wi-Fi Setup
In this section you can connect the device to the router. You can configure your network connection in
one of the 3 ways: Scan, with WPS or via Esptouch app on your smartphone. See 5.4.1.1. Wi-Fi Setup via
Esptouch App on page 14 for more information.
Turn the TUNE/SELECT control to choose ADD/REMOVE AP.
Press the TUNE/SELECT control to confirm.
Turn the TUNE/SELECT control to choose ADD AP(SCAN), ADD AP(WPS BUTTON) or
ADD AP(SMARTCONFIG). See Wi-Fi Network on page 37 for more information.
Press the TUNE/SELECT control to confirm.