DAPAudio D6148, Manual

Page: 10 / 16

9
25. Priority remote terminal
Use this terminal for connecting a remote switch or relay contact. If these two contacts are shorted, all
inputs except
combo input 1 (30) will be muted when combo input 1 (30) detects a sound.
26. Telephone paging terminal
Use this terminal for connecting a telephone system equipped with a paging output.
27. Telephone paging level control
Use to adjust the input volume level for the telephone paging (26) terminal.
28. Telephone paging assign dipswitch
Use to assign the telephone paging input to one or more zones.
29. Input 1 Impedance/level switch
This switch allows you to set up combo input 1 for line level, microphone level with phantom power or
microphone level without phantom power.
30. Combo input 1
Combo input for channel 1. Accepts balanced or unbalanced inputs.
31. Input 1 gain control
Use to adjust the input gain for input 1 (30) .
32.
GND Screw
This screw offers a separate ground connection. Can be useful in case of grounding problems.
33. Zone 4Ω impedance speaker terminals
Connect this terminal to the + terminal of a 4
Ω
speakerload.
In case of using several speakers, make sure that the total speaker load is the same as the impedance of
the corresponding terminal. The total power rating of the low impedance speakers connected to this
terminal summed, should be at least 60W.
34. Zone 25V high impedance terminals
Each zone has its own output terminal. Connect this terminal to the + terminal of your 25V high
impedance speaker load. In case of using several speakers make sure all speakers are wired in parallel.
The total power rating of the high impedance speakers connected to this terminal summed, should never
exceed 60W.
35. Zone 100V high impedance terminals
Each zone has its own output terminal. Connect this terminal to the + terminal of your 100V high
impedance speaker load. In case of using several speakers make sure all speakers are wired in parallel.
The total power rating of the high impedance speakers connected to this terminal summed, should never
exceed 60W.
36. Input 5 gain control
Use to adjust the input gain for input 5 (37) .
37.
Input 5
RCA stereo input for connecting a line level device such as an I-pod, CD player etc.
38. Input 4
RCA stereo input for connecting a line level device such as an I-pod, CD player etc.
39. Input 4 gain control
Use to adjust the input gain for input 4 (38) .
40. Input 3 Impedance/level switch
This switch allows you to set up combo input 3 for line level, microphone level with phantom power or
microphone level without phantom power.