7
Controlpanel
Fig. 2
1.
Volume control
Use to adjust the input volume level for the X-12MA.
2. Limiter LED
We suggest you to set the input level with the L-R level controls in such way that the LED blinks
occasionally. If the LED lights up continuously we strongly suggest you to lower the
volume
(1)
.control.
3.
Loudness button
The loudness circuit amplifies certain frequencies in order to get a more full sound at low volumes.
4.
Low frequency control
Use to set the optimal crossover frequency for the active subwoofer connected to the low output.
5.
Satellite/ fullrange button
Allows you to switch the X-12MA as either a satellite speaker (in combination with an optional active
subwoofer) or as a full range speaker.
Backpanel
Fig. 3
6.
Combo Input
This input equipped with 3 pole XLR/ jack combo socket is electronically balanced to accept the (line
level) signal from any mixing console.
7.
Full range XLR output
For linking several X-12MA speakers.
8.
Low XLR output
For connection of an optional active subwoofer.
9. Powercon
AC inlet
This connector is meant for the connection of the supplied main cord. Connect one end of the power
cord to the connector, the other end to the mains, then turn on the
power
(11)
switch to operate the
unit.
Make sure that the supply voltage matches the operation voltage before connecting the unit to mains
Summary of Contents for D3258
Page 13: ......
