background image

 

 

 

26 

 

  

 

 

PSS-106 Battery Speaker 

Product code: D2612/D2613 

 

Storage 

This device contains a rechargeable (secondary) lithium-ion battery. The battery is not replaceable. The 
battery may explode or cause burns if it is crushed, disassembled or exposed to fire or high temperatures. 

 

Store the device in a dry place, at temperatures between 5 °C and 20 °C. Lithium-ion batteries self-
discharge during storage. Temperatures above 20 °C speed up the self-discharging process. 

 

Do not store the device with depleted battery. Make sure that the battery is charged to at least 50 % 
before storing the device. See 4.5. Charging the Battery on page 15. 

 

If the device is stored for an extended period, check the battery’s charge status regularly. 
See 6.4. Battery Statuses on page 21. 

 

Clean the device before storing. Follow the cleaning instructions in chapter 8.1.1. Basic Cleaning 
Instructions
 on page 25. 

 

Store the device in the original packaging, if possible, or in the special transport bag. 
See 3.7. Optional Accessories on page 13). 

10.

 

Disposal 

This device contains a lithium-ion battery. Do not dispose of with the household waste. 

 

Correct disposal of this product 

Waste Electrical and Electronic Equipment 

This symbol on the product, its packaging or documents indicates that the product 
shall not be treated as household waste. Dispose of this product by handing it to the 
respective collection point for recycling of electrical and electronic equipment. This 
is to avoid environmental damage or personal injury due to uncontrolled waste 
disposal. For more detailed information about recycling of this product contact the 
local authorities or the authorized dealer. 

11.

 

Approval 

 

 

 

 

Hereby, Highlite International declares that the device PSS-106, product code D2612 and D2613, is in 
compliance with Directive 2014/53/EU (RED – Radio Equipment Directive). 

The full text of the EU declaration of conformity is available at the respective product page on the 
website of Highlite International (

www.highlite.com

). 

Wireless microphone frequency: 863–865 MHz 

Exclusion of liability  

The frequency ranges available for radio transmitters differ per country and region. Consult the 
respective national and/or regional authority as licensing or specific restrictions may apply for the use of 
the device. We do not take any responsibility in case the device cannot operate or cannot be used in 
your country/region or if it requires additional licensing. Before using the device, check the allowed 
frequencies in your country or region.  

Summary of Contents for D2612





























Reviews: