22
PSS-106 Battery Speaker
Product code: D2612/D2613
Setting Voice Priority
●
When the voice priority switch (19) is pressed, the device will mute other channels whenever you
speak into the microphone connected to CH1 or the wireless microphone.
●
When the voice priority switch (19) is released, the device’s output will not be muted whenever you
speak into the microphone connected to CH1 or the wireless microphone.
Connecting Devices
●
Use the combo XLR/jack connector (12) to connect a microphone or a line level device.
Note: Make sure that the microphone/line impedance switch (13) is in the correct position (pressed
for microphone; released for line level device).
●
Use the line/high impedance input connector (28) to connect low or high-impedance line level
devices.
Note: Make sure that the line/high impedance switch (27) is in the correct position (pressed for high-
impedance devices; released for low-impedance devices).
●
Use the aux stereo input connector (25) to connect auxiliary signal sources (i.e. a laptop or a media
player).
●
Use the line/mix output connector (26) to connect the device and send signals to another speaker.
Wireless Microphone Receiver
Fig. 14
Selecting Channels
Use the UP/DOWN buttons (30/33) to select a channel or to pair the WM-10 microphone or the BP-10
Beltpack with the device. See 5.5. Connecting the Microphone to the Receiver on page 17 for more
information. The SET button (32) does not have any function in this version of the device.
Adjusting Microphone Signal Volume
Turn the microphone signal volume control (31) to the left/right to decrease/increase the microphone
signal volume.
Summary of Contents for D2612
Page 28: ...2022 DAP...
