Ordercode: D6583
CS-620
Sound Warping
If the sound coming out of your ceiling speakers is loud enough, but seems to be warped or distorted,
your treble or bass levels may need to be adjusted.
If there are not many pieces of furniture in the room and the floor has no carpet or rug, then you will most
likely have to set your treble to minus. With very little in the room to absorb the sound, too much treble
can make the sound bounce off of fixtures in the room, making it tinny sounding.
With the bass, if the speakers are too close to a wall and are not aimed properly, then you will need to
set the bass to minus, to stop the low tones from bouncing off of the walls or large pieces of furniture.
Product Specification
Power taps:
5/10/20W
Line voltage:
100V
Impedance:
8 Ω
Speaker size:
6 inch
Frequency response:
110-15kHz
Sensitivity:
94 dB
Material:
ABS
Colour:
White
IP rating:
IP20
Mounting Hole:
Ø 225 mm
Dimensions (LxWxH):
245 x 245 x 65 mm
Weight:
1,1 kg
Dimensions
Design and product specifications are subject to change without prior notice.
6
Summary of Contents for CS-620
Page 8: ...2015 DAP Audio...
