23
Record panels
Gives you access to a recorder. For more information on the Virtual DJ software, we suggest checking the
Support Section on
. Here you can find manuals, forums etc.
Maintenance
The DAP Audio Core Kontrol D1 requires almost no maintenance. However, you should keep the unit
clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse
in liquid. Do not use alcohol or solvents.
Keep connections clean. Disconnect electric power, and then wipe the audio connections with a damp
cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Troubleshooting
Problem
Probable cause(s)
Remedy
Controller is
not recognized
in windows.
No driver installed.
1. Unplug all other USB cables and devices.
2. Plug in your controller’s USB cable.
3. Check if your driver (ME 702SC) is installed and
running.
Windows Vista & Windows 7:
Start/Devices and Printers/.
Windows XP:
Start/Control Panel/System/Device Manager/.
4. Reinstall the driver if necessary.
No sound from
controller
Incorrect
soundcard settings.
Check the settings in the config menu.
See page 19-20:
Running the Virtual DJ-software for the
first time
of this manual.
No sound from
the controllers
headphone
output.
Incorrect
soundcard settings.
Check the settings in the config menu.
See page 19-20:
Running the Virtual DJ-software for the
first time
of this manual.
No access to
the controller’s
built in
soundcards
during setup.
Controller is not
connected to your
PC’s USB port or is
switched off.
1. Check if your controller is switched in.
2. Check if the controller is connected to your PC
3. Check your USB cable.
Sound from
controller
despite all
faders are in
minimum
position.
Incorrect
soundcard settings.
Check the settings in the config menu.
See page 19-20:
Running the Virtual DJ-software for the
first time
of this manual.
Summary of Contents for Core Kontol D1
Page 29: ......
