DAPAudio Clubmate 12, Product Manual

Page: 8 / 14

6
Overview Subwoofer
Fig. 2
1) Air Cooling Window
2) Protect LED
Lights if the units protection circuit is active. If the protection circuit is active, the outputs will be
muted.
3) Right Channel Combo Line Input
The input equipped with 3 pole XLR/ jack combo socket is electronically balanced to accept the
(line) signal from any mixing console.
4) Sub Volume Control
This control allows you to adjust the Subwoofer volume level.
5) Phase Switch
This switch allows you to inverse the phase of the Satellite outputs if necessary.
6) Power LED
Lights if the Power is on.
7) Volume Control
This control allows you to adjust the total volume level of the clubmate.
8) Left Channel Combo Line Input
The input equipped with 3 pole XLR/ jack combo socket is electronically balanced to accept the
(line) signal from any mixing console.
9) Power ON/OFF
Do not supply power before the whole system is set up and connected properly. An external fuse
protects your system from any damage caused by electrical failures.
10) IEC Connector with integrated fuse holder
This connector is meant for the connection of the supplied main cord. Connect one end of the
power cord to the connector, the other end to the mains, then turn on the
Power switch (1) to
operate the unit.
Note: Please make sure that the supply voltage matches the operation voltage before connecting
the unit to mains. Replace the fuse only with a fuse of same specification (T3,5A).
11) Right Channel XLR Aux output
This parallel output allows you to connect more bass-cabinets together as well to connect other
systems such as monitor power amplifiers, individual components etc.