42
CMU055-A2a
www.daptech.com
Advanced Settings
PARTNERSHIP WITH ETHERNET CRADLE
Note: The “Ethernet Partnership” is only possible with ActiveSync 3 .7, 3 .8 or lower .
The Ethernet connection requires the use of a cradle model # CBCE840-3 or CBCE840-4 and an Ethernet
cable connected between the cradle and your network . Refer to the
“using the Cradle” section for further
instructions .
An initial Ethernet connection normally requires a “Partnership” with your “Host” computer using a serial or
USB port . DAP Technologies has made these following programs available to assist in the creation of the “
Ethernet Partnership” when using the Ethernet cradle:
• SetPartnerShip .exe (Already installed on the CE8000B unit)
• PartnerShip Server .exe (This program must be downloaded)
Download PartnerShip Server.exe
1 . Go to http://www .support .daptech .com
2 . Refer to CE .NET PUBLIC DOWNLOAD
3 . Copy to a folder that will be easily accessible; e .g . Desktop Folder .
Create first Ethernet partnership
1 . Install the CE8000B unit into its Ethernet Cradle
and wait until the network has been detected .
2 . Launch
PartnerShip Server.exe on the Host
computer .
Click on arrow to see more icons
if network icons are not visible .
Network connection
is established .
Summary of Contents for CE8640B
Page 2: ......
