
www.jpwassociates.com
13
DAP-000140
Operation Guide
Note:
See under
Start > Settings > Control Panel > _Power The default settings are 16% for “Low Level” and 5% for “Very
Low”
Backup Battery
The backup battery is used when
replacing the main battery or when the main battery has expired The backup battery is kept charged by the
main battery
Main Battery Low
By default, at 16% of capacity,
the Low Battery Indicator will
appear on the Message Bar
Main Batteries Very Low
Following several hours of use, the main battery will become very low By default, at 5% of capacity, the
Very Low Battery Indicator will appear on the Message Bar
And the Main Battery Very message will be displayed to the user At this stage, there is still some power
remaining but it is highly recommended to recharge the battery to avoid a loss of data This warning shall be
displayed approximately every 4 minutes for as long as the battery is below 5 %
Main Battery Expired
Should the user continue to work with the unit,
at some point the Main Battery Expired message
will appear, the units beeps 3 times and suspend
This cycle could happen for sometime if the user
persists to resume the unit and try to continue
working with it
WARNING
At this point, data may be lost if the unit is not
re-charged immediately
BATTERY WARNINGS
Note:
To check how much power remains click on: Start > Settings > Control Panel > Power > Battery
Summary of Contents for CE3000B Series
Page 2: ......
Page 8: ...4 DAP 000140 www jpwassociates com ...