R
www.danvex.fi
13
NOTE:
When Automatic FAN is selected, the unit will automatically
select the suitable amount of air flow according to room temperature.
Press "FAN" button to select the required amount of air flow,
which is changed in the following sequence when pressed once:
Automatic Low Mid High
AUTO Operation Mode
Mode Selection (1)
Press "Mode" button to select Automatic Operation mode.
To set the temperature (heating) by button '+' and '- ', 5 seconds
Later will be confirm; then to set the dehumidify by button '+'
and '- ', 5 seconds later will be confirm.
Fan Selection (2)
Starting Operation (3)
Press " On/Off " button, and when the unit receives the signal, it
gives out two " beep " tones, the operation light is on and the
dehumidifier starts operation is automatic mode.
NOTE:
In automatic mode, user can select the room temperature and humidity separately:
Heating
Dehumidify
18~31 adjustable
1%~99% adjustable
Factory setting is 25
Factory setting is 60%
Adjustment in Automatic Mode
Feeling
Button
Unsuitable fan speed
FAN
Operation
Press once to change the air flow progressively until the
suitable air flow is selected.
