Page
28
of
39
When installing the machine, it must be ensured that the connecting pipe is securely connected
before starting the compressor. If the compressor is started before the connection of the connecting
pipe is completed and the shut-off valve is opened, air will mix in causing the system pressure to
rise, and a compressor burst accident may cause injury.
Do not install in places where corrosive or flammable gases may leak. If a gas leak occurs and
gathers around the unit, it may cause an explosion accident.
Do not connect in the middle of the wire. When the connecting wire is not long enough, please
contact your local authorized service center to re-equip a special wire with sufficient length.
Poor connection may cause electric shock or fire.
The power cords between the indoor and outdoor units must be properly connected using the
specified power cords, and the terminals should not be directly affected by external forces and
should be fixed with wire clamps.
Insufficient capacity of the power cord, incorrect wiring, or poor contact with the terminals may
cause electric shock or fire hazard.
Summary of Contents for DD Series
