background image

Form No. 3387

DANUSER

LIMITED WARRANTY

Danuser LLC (“Danuser”) warrants its products, under normal use and maintenance, to be free from defects in material and
workmanship for period(s) specified below from the purchase date from an authorized Danuser Dealer.  Start of the warranty period 
is determined by purchase date given on your returned WARRANTY REGISTRATION FORM.  Proof of purchase may be 
required.  This Limited Warranty is extended only to the original purchaser of Danuser products.

EP Drive Units - 3 Years               Mountings - 1 Year               Augers - 1 Year

Lifetime Warranty Covering EP Drive Unit Output Pull Out

Wear Items Not Covered Under Warranty - Hydraulic Hoses, Seals, Auger Teeth, and Auger Point

1.

During the applicable warranty period, Danuser, at its option, will repair or replace any part determined by Danuser to be 
defective.  Such repair or replacement shall take place at Danuser’s factory or a location designated by Danuser.  Under no 
circumstances shall Danuser be obligated for the cost of any repair or replacement by anyone other than Danuser without its 
express written consent.

2.

Parts may not be returned without written authorization from Danuser.

3.

Some purchased components, including but not limited to hydraulic motors, planetary gears, and augers, are subject to the 
inspection and warranty of the respective manufacturer.  Thus, delays in a warranty determination can be expected while 
Danuser awaits their decision.

4.

This warranty is void if any attempt is made to make field repairs to hydraulic motors or planetary gears. To qualify for
warranty inspection, the complete drive unit must be returned in its original “failed” condition.

5.

To make a claim under this warranty, first contact your authorized Danuser Dealer.  The Danuser Dealer shall complete the 
Warranty Claim Form and obtain written authorization from Danuser to return parts.  All warranty claims must include 
detailed information regarding make and model of vehicle on which the Danuser product was mounted, hours of use,    
description of events that led up to the failure, and any other information helpful in reviewing the warranty claim. All
warranty returns must be prepaid.  Shipments arriving at our factory on a freight collect basis will be refused by our
receiving department. The freight charge will be credited if the parts are determined by Danuser to be defective, and the 
associated freight costs in returning those parts will be prepaid by Danuser.  NOTE: Hydraulic motors must arrive with all 
ports sealed from dirt and moisture.  If a motor arrives with open ports, the warranty is void and no inspection will be made.

6.

Products or parts thereof which, as determined by Danuser’s examination, show wear from normal use, have been 
improperly operated, damaged by accident or negligence, field repaired, altered or modified are not considered defective in 
material and workmanship and are not covered by this warranty.  This warranty does not apply to parts subject to normal 
wear ("Wear Items") or to damage caused by the failure to perform recommended maintenance or to replace worn parts.
This warranty shall not obligate Danuser to bear any cost of labor for field repair, replacement, testing, or adjustment nor for 
damage caused by accident, abuse, misuse, or environmental elements.

7.

Any parts or labor required to repair or replace parts not covered under this warranty will be charged to the customer.  Parts 
repaired or replaced by Danuser are then covered by this warranty only for the remainder of the original warranty as if such
parts were original parts.

8.

Danuser reserves the right to change its specifications and designs at any time.

This warranty is exclusive and in lieu of all other express warranties, if any, including the implied warranties of merchantability 
and fitness for a particular purpose.  It shall not extend beyond the duration of the expressed warranty provided herein and the 
remedy for violations of any implied warranty shall be limited to repair or replacement of the defective part pursuant to the terms 
contained herein.  No employee, dealer, salesman, or representative is authorized to change this warranty in any way or grant any 
other warranty.  Danuser shall not be liable for any consequential, incidental, or punitive damages, losses, or expenses, including 
those resulting from or caused by any defects.

Warranty

Danuser LLC

Tel:

(573) 642-2246

500 E. 3rd St.

Fax:

(573) 642-2240

P.O. Box 368

E-mail:

[email protected]

Fulton, MO  65251

Website:

www.danuser.com

Model # 

Serial #

Summary of Contents for EP6 Hex































Reviews: