Installation and service manual
Version 2.5
7
3.
Installation of the unit
3.1 General
To avoid vibrations being transmitted to other objects in the room, the unit should be placed on a hard, level
and stable surface.
Make sure that there is a free access to the inspection doors and that they can be fully opened.
3.2 Moving in Vent C/R 6 units
The Vent R/C 6 is delivered as ready-mounted units. If it proves necessary to dismount part of the unit to get
it through the door opening, the following procedure is recommended:
Loosen the screws of the base frame (1)
Remove the cables from the fans (2)
Remove the measuring hoses from the fans (3)
Loosen the fixing screws in the four corners of both fan modules. (4)
Remove measuring hoses, electric cable and rubber entry from fan section (5)
To reassemble the unit follow the same procedure in the opposite order.