4
General information
Introduction
This section gives you the general information about this service manual and the unit.
Manual, part no.
Part number of this service manual is 092889
Target group
The target group for this service manual is daily users and Technicians
Reservations
Dantherm Air Handling A/S reserves the right to make changes and improvements to
the product and the service manual at any time without prior notice or obligation.
EU Declaration of
Conformity
Dantherm A/S
Hereby declares under our sole responsibility that the product(s):
Product name: HCV700
Product no.:
352443
Covered by this declaration is in conformity with the following directives, standards or
other normative documents, provided that the product is used in accordance with our
instructions:
2014/35/EU
LVD
Directive
2014/30/EU
EMC Directive
2014/53/EU
RED
Directive
1907/2006
REACH
Regulation
2012/19/EU
WEEE
Directive
EN 60 335-1:2012
Household & similar electrical appliances, Safety - Part 1
EN 61 000-3-2:2014
Electromagnetic compatibility (EMC) –
Part 3-2: Limits (Harmonics)
EN 61 000-3-3:2013
Electromagnetic compatibility (EMC) –
Part 3-3: Limits (Flicker)
EN 61 000-6-2:2005
Electromagnetic compatibility (EMC) –
Part 6-2: Generic standards (Immunity)
EN 61 000-6-3:2007
Electromagnetic compatibility (EMC) –
Part 6-3: Generic stand-ards (Emission)
EN 61 000-6-3/A1:2011
Electromagnetic compatibility (EMC) –
Part 6-3: Generic standards (Emission) - Annex 1
EN 62 233:2008
Measurement methods for electromagnetic fields of
household
appliances
EN 55 014-1:2007
Electromagnetic compatibility - Requirements of
household appliances etc. Part 1: Emission
EN 55 014-2:1997
Electromagnetic compatibility – Requirements of
household appliances etc. Part 2: Immunity – Prod
uct family standard
EN 30 1489-1 EMC / ERM Part 1
EN 30 1489-3 EMC / ERM Part 3
EN 30 0200-1:2013-02
EMC / ERM Short Range Device Part 1
EN 30 0200-2:2013-02
EMC / ERM Short Range Device Part 2
EN 30 0200-3:2013-02
EMC / ERM Short Range Device Part 3
Skive, 14.09.2017
Recycling
Dantherm units are designed for long term durability. When total lifetime ends, the unit
should be recycled according to national rules and with high environmental protection
considerations.
